|
Post by Old Coote on Jun 16, 2009 23:03:58 GMT -8
I have a buddy with an 1987 Jeep wrangler..... when he puts the transfere case into 4 low it pops out under pressure, it will pop out of 4 high as well, then when going back into 2 high it doesnt always engage, and sometimes when he comes to a stop it will pop into netraul (or so it feels like). I have checked the linkage and it seems as if the adjustment is correct and we have the complete throw with the linkage disconnected. It also doesnt feel as if the front axle is engaging, while in the air and in 4WD the front doesnt turn. any ideas?
|
|